Ad200 Series Single Phase 0.75kw/1.5kw/2.2kw Economical Universal Frequency Converter

• Customization: Available
• Application: High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer
• Output Type: Single
• Model NO.: S2 0.75kw~2.2kw
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type, Elevator Special, Textile Special, Constant Torque Universal Type
• Transport Package: Cartoon
• Trademark: LAEG
• HS Code: 8504409930
• Production Capacity: 500

Product Description

Input & Output	Analog input	1 channel,voltage / current signal can be switched,voltage 0~10V,current 0~20mA
	Digital input	5 channels,Optocoupler isolation
	Analog output	1 channel, voltage 0~10V,current 0~20mA,Output type switchable
	Digital output	1 channel, Optocoupler isolation / open collector output / rated current 20mA (Y terminal)
	Digital pulse output	1 channel,Optocoupler isolation / open collector pulse (frequency or PWM) output (Y terminal)
	Relay output	1 channel,Normally open and normally closed contact, 250VAC-3A
	Communication mode	Standard MODBUS-485 communication protocol
Control characteristics	control mode	Space voltage vector control mode
	Frequency setting mode	Keyboard setting, analog setting, pulse setting, PID, communication setting and others
	Frequency control range	0.01~400Hz
	Speed regulation ratio	1:100
	Steady speed accuracy	±0.5%(SVC)
	Multistage speed control	Built in simple PLC can control the maximum 16 speed frequency logic
	Carrier adjustable	1.0~16kHz ,adjusted according to the module temperature
	Important functions	Shutdown mode, bus overvoltage protection
Protection function	Overload capacity	60s-rated current x 150%; 10s-rated current x 180%;3s-rated current x 200%
	Open phase protection	In case of phase loss at the input or output end, the motor stops freely
	Overheat protection	Threshold can be set freely according to the ambient temperature, accuracy is ± 3 ºC
	Stall protection	Prevent stall during acceleration or deceleration or operation (working current can be set)
	Grounding protection	by current sensor
	Instant stop	The load feedback energy compensates for the voltage reduction and maintains the continuous operation of the frequency converter in a short time
Specification structure	Rated input	voltage:1PH220V±15%; 3PH380V±15% Frequency:50Hz/60Hz±5%
	Cooling and protection	IP20;forced cooling
	Use environment	-10ºC~+50ºC;Derating above 40 ºC; Altitude: not higher than 1000m; Indoor, no corrosive gas
	Preservation environment	-20ºC~+65ºC;Humidity: 20-90% RH (no condensation); shock <6m/s2(0.6g)